Currently, the options for remote control of a device are very varied. The factory remote control is no longer needed exclusively. There are possibilities for configuring a universal remote control without a code, allowing you to access and control different actions remotely and easily. The objective of this type of device is to provide a quick and simple configuration, compatible with any television.
El universal remote control has a configuration that in many cases requested a specific numerical code. Over time, this requirement has disappeared or given way to other configurations. In this article we explore what they are and how to get the most out of a universal remote control for our television.
The universal remote control for your television
The television is an almost fundamental part of the family's rooms, allowing people to enjoy everything from newscasts to movies, music channels, cooking and much more. Although over time the Internet has replaced a good part of this content, it is still a present device because it was adapted into a smart television format.
Whatever your type of television, sometimes it is necessary configure a universal remote because the original broke or you have directly obtained a different version with new functions. Setting up a universal remote is easier than before, but it can still be a bit of a challenge if you've never done it.
In case you need interact with your television from another remote control, it is always good to have the alternative of a universal control on hand. The alternative is available for us to think about ways to control a television without needing an original remote control, and without having to learn physical controls. On the other hand, in some models it is quite uncomfortable.
But if you need to control the TV with a universal remote, the codeless setup process isn't that complicated. Step by step, we explore how you can complete the setup to manage channels, volume and other menus on your TV with a universal remote.
Set up a universal remote to work on any TV
In case you have a universal remote already purchased, you have to know that before working you will need to configure it. Your TV model has a specific code, so check your instruction manual to find it. If you have this information, the process is faster and easier because all the information they need to synchronize is housed in that code. The steps in this case would be:
- Turn on the TV.
- Press and hold the Device button for a few seconds until the LED lights on the controller illuminate.
- Without releasing the Device button, press the brand code numbers for your TV.
- If the manufacturer has multiple codes, you have to try them one by one until pressing the Power button turns the TV off.
- Do not release the power button until the light on the controller turns off. If it flashes, it is not the correct code.
- Once the code is confirmed, test the rest of the remote functions to ensure correct detection of the device.
Get the code for the universal remote control on your television
It is likely that You do not have the television manual on hand or have lost it. In that case, finding your model code may be a little more difficult, but not impossible. The remote control can do an automatic search if necessary. Not all universal controls include this function, but the newer ones already have it incorporated. The process may be a little more tedious, but it doesn't take much longer.
- Turn on the television you have at home or in the office.
- Press the TV or SET button on the remote control. There are even models that have a dedicated button for this function.
- Keep the button pressed until the LED light starts flashing.
- Point the universal remote at the TV and press Canal+ or Canal-.
- The light will flash every time you try a code.
- If the television changes channels, you are looking at the correct code for your television model.
- If it doesn't change the channel, keep trying until you find the correct code.
Manual search for your TV code
La code search In case you don't have the manual, it can also be done manually. For this type of setup, the time will be even longer. There are at least two ways to achieve this. A first way would be:
- Turn on the TV.
- Press and hold the Device and Power buttons until the LED lights up.
- Press the power button and wait a few seconds to see if the device turns off.
- If the TV turns off, you found the correct code so press the STOP button and that's it.
If even with this manual search you cannot find the code, use this following procedure:
- Turn on the TV.
- Press the SET or TV button or one dedicated exclusively for manual code search.
- Wait until the LED light flashes.
- Enter the code 991 and quickly enter Canal+ or Canal- repeatedly.
- The LED light will flash every time you try a code, wait for the TV to change channels and then you will have found the corresponding code.
You will have to repeat this last method until it works. It is the slowest way but also the one that sooner or later will allow you to find the necessary code for the universal remote control.
Do universal controls always work?
To the date, There have been very specific cases of broken devices that do not have support for universal controls. These types of remote controls are created to work with any television model, and ultimately it may happen that they are very old models that do not achieve compatibility. Nowadays, the configuration is much simpler and more automated, and in just a few minutes the universal controls are ready and configured to manage the volume, menu and channels of any television. Try these options to avoid difficulties in case you need to change your controller. It doesn't matter if you lost it or if you are looking to change commands for reasons of taste. Setup should take you no more than a few minutes.